What near-miss footage can show
Using near-miss footage to improve plant machinery safety helps site managers review how an incident developed and what could prevent it happening again. Footage can show where a pedestrian approached, how the machine was moving and whether anything restricted visibility. TrafficAngel’s PlantShield 360 detects people within configured zones and warns the operator. An optional DVR adds recording, with LiveDrive remote access available on compatible setups. Reviewing the footage alongside the operator’s account and near-miss report can help identify changes to pedestrian routes, site procedures or training.
Ontdek PlantShield 360Why near misses are worth recording
The Health and Safety Executive’s Near-miss Book explains that recording near misses helps employers identify patterns in when and how things go wrong. Repeated events can indicate a problem that needs attention before someone is injured.
Around excavators, dumpers, telehandlers and forklifts, restricted visibility can make it difficult to establish exactly what happened. Where cameras captured the event, footage can add detail to the near-miss report and help managers check the accounts given by those involved.
What PlantShield 360 records when a DVR is added
PlantShield 360 uses up to four AI cameras to detect people within configured zones around the machine. With two zones configured, the in-cab display shows yellow for the outer caution zone and red for the inner danger zone. Audible warnings include positional callouts such as “pedestrian left” and an instruction to stop. When the machine is stationary, alerts are visual only.
Recording is an add-on. A compatible TrafficAngel DVR can record all connected camera channels. With the required connectivity and LiveDrive setup, authorised users can also view live footage and download recordings for investigation and training.
Email and SMS alerts can be configured to notify authorised staff when a pedestrian is detected while the machine is moving. An alert flags a detection for review; it does not establish that a near miss occurred.
Learn More About LiveDrive
Turning recordings into changes on site
Using near-miss footage to improve plant machinery safety depends on acting on what the recordings show.
Checking the high-risk zones
Look for repeated events around reversing areas, loading bays, tight access points, blind corners and pedestrian crossings. Check whether congestion, shift changes or high background noise contributed to what happened.
Refining traffic management
Review whether pedestrian routes, crossing points or exclusion zones need changing. Footage should be considered alongside the near-miss report and site risk assessment. After making changes, check whether they have addressed the problem.
Reviewing detection zones
Detection zones need to suit the machine and the way it operates. If routes, working areas or machine movements change, review whether the settings are still suitable. TrafficAngel’s aftersales team can help with system changes as site requirements develop.
Using footage in training and coaching
Recorded footage can support operator training alongside incident and near-miss reviews. Use relevant clips to discuss what happened, hear the operator’s account and agree any changes needed. Where compatible driver-monitoring equipment is fitted, it can also flag signs of fatigue, distraction or mobile phone use for review. An alert should be considered alongside the footage and circumstances.
PlantShield 360 supports existing safety controls. It does not replace banksmen, traffic management plans, exclusion zones or operator training. The optional Duim omhoog-systeem adds a visual approach signal: once the machine is stopped, the operator presses an in-cab button to change the red stop display to a green thumbs-up.
Recording at H+H
At H+H’s manufacturing sites, specialist forklifts move finished products between production, storage and outbound vehicles. Following a site assessment, TrafficAngel fitted PlantShield 360 with four external AI cameras and an in-cab LED display, alongside a DVR and internal camera for recording.
H+H wanted real-time hazard detection, clear driver alerts and reliable recording to support incident review. Ian Hunter, Logistics Specialist at H+H UK Ltd, reported that the footage had already proved useful for reviewing incidents and supporting training.
Handling footage of people on site
Footage that identifies workers or visitors is personal data. Before recording begins, explain why cameras are fitted, how footage will be used, who can access it and how long it will be kept. This includes people recorded by external cameras, as well as operators on driver-facing cameras.
The business needs a lawful basis and must assess the privacy risks, completing a data protection impact assessment where required. Check the ICO’s guidance on monitoring workers, which is under review following the Data (Use and Access) Act. TrafficAngel supports the equipment; the business is responsible for its use of footage.
Adding recording to PlantShield 360
If you’re considering using near-miss footage to improve plant machinery safety, tell us which machines you operate and what equipment is already fitted. We’ll advise on adding DVR recording to PlantShield 360 and whether LiveDrive remote access suits your site. Call 01825 768 555e-mail sales@trafficangel.co.uk or Neem contact op met TrafficAngel to discuss detection and recording for your machines.
Boek een PlantShield 360-demonstratie.Veelgestelde vragen
No. Recording requires an additional DVR. Remote viewing and downloading recordings through LiveDrive also require a compatible setup and connectivity.
Yes. Email and SMS notifications can be configured for authorised staff when a pedestrian is detected while the machine is moving. Each alert needs reviewing to establish whether a near miss occurred.
No. PlantShield 360 uses a G-sensor to detect machine movement. When stationary, it provides visual-only alerts; when moving, it provides audible and visual alerts.
Yes. Applications include excavators, wheel loaders, dumpers, telehandlers, forklifts and yard vehicles. Camera positions and detection zones need to suit the particular machine and its work.
No. Recordings help teams investigate events and review working practices. They do not replace the controls needed to keep pedestrians and machinery apart, or any banksman required by the site’s safe system of work.